About 7809 Voltage regulator
7809 Voltage regulator is a type of self-contained fixed linear voltage regulator integrated circuit. The IC belongs to 78xx voltage regulator family which is commonly used as the regulated power supply in electronic circuits The IC 7809 is not as popular as ic 7805. The 7809 voltage regulator IC is ease-of-use and available in very low cost. The last two digits of 7809 indicates the output voltage that is voltage.
The 7809 regulator line is a positive voltage regulator that is the 7809 voltage regulator ic generate the voltage which is positive with respect to the common ground. In case if both the positive and negative voltage supply is needed in the same circuit. The voltage regulator 7809 is combined with its corresponding 79XX family IC. The voltage regulator 7809 is available most commonly in TO-220 package, more over the IC is also available in TO-3, TO-92 and surface mount Packages.
The 7809 Voltage regulators do operate at their optimal capability if the input voltage is at least 2.5 volt greater than the output voltage and the current is 1 or 1.5 Amperes more. Though the voltage and current different is different for other IC Packages.
How to use 7809 voltage regulator circuit
The IC 7809 have 3 pins, Pin 1 is a positive input, Pin 3 is a positive output and pin 2 is negative common ground between both input as well as output voltage. When using the 7809 regulator setup, you need to take care of the current through the voltage regulator 7809 do not exceed beyond the capacity which is mentioned in the datasheet or else it may blow off. You also have to be careful with the connection you are making with the voltage supply. Reverse polarity does get the ic heat up really quickly, you can also use a pn junction diode in order to prevent such a condition.
You can use the capacitors in order to minimize the voltage fluctuations in the circuit and maintains the constant voltage across the input as well as output of the circuit.
Advantages
- 7809 voltage regulator ic does not require any component to balance or saturate their output voltage.
- The IC 7809 has a built-in protection from the high current. There is a heat-sink with the common ground connected with which is helpful in order to prevent our regulator ic from overheating and short-circuits making it uncompromising in the most application.
6 thoughts on “IC 7809 Voltage regulator Pin and Circuit Explained”
Why had you used 78XX Figure instead of 7809 Regulator IC ?
This is very easy method for making Mobil charger.
used this to charge my cam battery
Very Intresting
Thank you
As this IC can not use 1 Amp. And my supply source is 24 VDC 5 Amp.
Should I use resistance of 80 ohm in out put of power supply & than connect to the input of IC 7809 ?
Will it help to protect the IC from high amp ?